How to Source PU Pigment Paste for PU Systems?
How to Source PU Pigment Paste for PU Systems?
What Is Polyurethane Pigment Paste?
PU pigment paste is a concentrated dispersion of organic or inorganic colorants in a liquid carrier. It is formulated to be metered into a polyurethane system and give it uniform color without disturbing the cure. The carrier is usually a polyol or another isocyanate-compatible medium, so the paste becomes part of the polymer instead of sitting in it as a foreign liquid. Buyers also call it polyurethane pigment paste or PU color paste, and the terms describe the same product family. A paste that looks right in a mixing cup can still cause bubbles, shade drift or surface defects once it meets the isocyanate. That is why sourcing on color chips alone is the mistake buyers most often regret after the first production run.
This guide is for purchasing managers and formulation teams who need to qualify a supplier before requesting samples or a quotation. It covers paste types, features, applications, price drivers, a compatibility checklist and a trial-batch procedure.
Types of PU Color Paste
Pastes differ mainly by carrier, and the carrier decides where the product can be used. A paste built on a polyether polyol suits polyether-based systems, a polyester-based paste suits polyester systems, and a solvent-containing paste is aimed at coatings rather than cast parts. Before asking for a color, ask which carrier the supplier uses. That single answer removes most unsuitable candidates early. The table below summarizes the common options and the cases where each one should not be used.
| Paste type | Typical carrier | Best fit | Limits |
|---|---|---|---|
| Polyether polyol-based | Polyether polyol | Elastomers, soles, flexible foam on polyether systems | Miscibility with polyester polyol must be tested, not assumed |
| Polyester polyol-based | Polyester polyol | Polyester-based elastomers and some coatings | Moisture pickup during storage can cause bubbling at the mixing head |
| Solvent-free | Reactive or non-volatile carrier | Casting, flooring, parts where odor, shrinkage or voids matter | Viscosity can be higher, which may limit pigment loading |
| Solvent-containing | Isocyanate-compatible solvent | Spray or brush coatings | Solvent must be dry and non-reactive; not suited to thick cast sections |
| Custom-matched | Chosen to suit your resin | Fixed brand colors, special shades | Needs a target sample and system data before a match is possible |
A solvent-free PU pigment is not automatically the better choice. It fits systems where volatile content causes defects, but a thin, sprayable coating may still need a solvent-containing paste for flow.
Features of Polyurethane Pigment Paste
A good paste does four things consistently: it disperses finely, carries little moisture, stays stable in storage and meters easily. Fine dispersion gives clean color strength with less paste. Low moisture matters because water reacts with isocyanate to produce carbon dioxide, which shows up as pinholes or foaming. Storage stability means pigment does not settle into a hard cake. Easy metering means the paste can be pumped or weighed repeatedly with the same result. These are the features to ask a supplier to document, because they affect the production line more than the shade card does.
- Dispersion quality: ask how it is judged, for example by a fineness reading or a drawdown. Limit: a good drawdown in one resin does not guarantee the same result in another.
- Low moisture: ask for the water content method and value. Limit: moisture only matters for isocyanate-cured systems, so it is less decisive in some non-reactive uses.
- Batch consistency: ask how shade is checked from batch to batch. Limit: consistency is only meaningful if your own process is also stable.
- PU pigment compatibility: this has three layers: the carrier with your polyol, the pigment chemistry with your catalyst, and the finished color with your cure conditions.
Where PU Color Paste Is Used
Color paste is used wherever a polyurethane part or film needs a controlled shade. In PU soles, the paste is dosed into the polyol side before mixing with the isocyanate, and the shade must hold through demolding and finishing. If the sole is later sprayed, the base color and the shoe sole paint should be judged together, not separately. In PU car carpets and foam backings, color uniformity across a large area matters more than a precise Pantone match. In cast and flooring systems, thick sections expose any bubbling or settling. In two-component coatings, the paste has to coexist with the curing agent without shortening pot life or clouding the film. Match the paste type to the process, not just to the product category.
A Compatibility-First Sourcing Checklist
If you are working out how to choose pigment for polyurethane, start with compatibility and leave shade for later. Shade can be adjusted in a few minutes, while a carrier mismatch can ruin a batch. Use the checklist below when comparing suppliers, and send the same questions to each one so the answers can be compared directly.
| Check item | What to ask or test | Pass signal | When it does not apply |
|---|---|---|---|
| Polyol carrier | Which polyol is the carrier? Is it the same type as your system? | Clear mixture with your polyol, no haze or separation after standing | Solvent-only coating pastes with no polyol component |
| Pigment loading | What is the colorant content, and what dosage reaches your opacity? | Target shade at a dosage that does not slow the cure or change hardness | Transparent tints where opacity is not a goal |
| Viscosity | What is the viscosity at your working temperature? Will your pump or meter handle it? | Pumps and weighs consistently, with no bridging or air entrapment | Hand-mixed small batches |
| Moisture content | Is a water value stated, and how is it measured? | Low and documented, no bubbles in a cast test piece | Systems not cured with isocyanate |
| Catalyst interaction | Does any pigment change gel time or pot life? | Gel time in a colored trial matches an uncolored control | Fully pre-cured substrates |
| End-use resin test | Has the paste been run in your actual resin and process, not a generic one? | Acceptable shade, surface, demold and physical properties in your own trial | None. This test always applies. |
The last row is the one most buyers skip. A supplier's data sheet describes their test system, not yours, so the only reliable evidence of fit is a trial in your resin.
PU Color Paste Price and Cost Factors
Paste prices move with several inputs, and quoted price per kilogram can mislead. Pigment type is the largest driver: inorganic pigments such as titanium dioxide generally cost less than high-performance organic colorants. Loading and tinting strength come next, since a stronger paste needs less dosage. Carrier choice, custom color matching, packaging size and order volume also affect the quote. The useful number is cost per colored part, not cost per kilogram of paste. For example, if paste A needs twice the dosage of paste B to reach the same opacity, A must cost less than half as much per kilogram just to break even. This is an illustration of the arithmetic, not a market figure. Our listed terms include no MOQ and a 30-day timeframe. Ask us to state in the quotation which stage that timeframe covers, so both sides read it the same way.
- Pigment chemistry and color difficulty
- Tinting strength and the dosage it implies
- Carrier type and moisture control
- Custom shade matching versus standard colors
- Packaging size and shipment volume
User Guide for a Trial Batch
Run the trial like production, not like a lab demonstration. A paste that behaves in a 50 g cup may behave differently on a metering machine, so keep the process variables as close to real as you can. Follow these steps in order and record the result at each one.
- Send the supplier your polyol type, isocyanate type, process (casting, spraying, foaming), target shade and any regulatory needs.
- Mix the paste into the polyol side and let it stand. Check for haze, settling or separation before adding isocyanate.
- Make an uncolored control and a colored sample with the same conditions, then compare gel time and pot life.
- Cast or spray a test piece in the real thickness. Inspect for bubbles, streaks and surface tack.
- If you use mold release, run the trial with the same release agent you use in production, because surface residue changes gloss and apparent shade.
- Measure shade after full cure, not wet. Then judge hardness and any physical property your customer specifies.
- Approve a dosage and shade tolerance in writing before any volume order.
Common PU Pigment Sourcing Mistakes
- Approving by color card only. A card shows shade, not behavior in your resin. Limit: acceptable only for non-reactive, decorative uses.
- Comparing price per kilogram. Dosage differences can reverse the ranking.
- Ignoring the carrier. A polyester paste in a polyether system can separate over time.
- Testing in a different resin. Results do not transfer between systems.
- Skipping the control batch. Without it you cannot tell whether the pigment changed gel time.
- Leaving terms unwritten. Shade tolerance, acceptance method and who is responsible for a failed trial should be agreed before ordering.
PU Pigment Supplier Fit with Sholee Chemicals
Sholee Chemicals supplies release agents, chemical additives, color paste and paint curing agents, and accepts customized industrial release agents, painting products and chemical additive products. Our application areas include PU soles, PU car carpets, wood-based panels, food paper, metal die casting, and paint and glue curing agent products. For buyers, that range means color paste, release agent and curing agent can be discussed in one conversation when they interact in the same line. Our listed terms are no MOQ and a 30-day timeframe. No certifications or test reports are listed in our brief for this article, so request the documents you need, such as a technical data sheet or safety data sheet, and confirm them in writing. Also agree on scope, acceptance method and responsibility for trial results before ordering. We would rather settle these points early than discover them during a production run.
FAQ of PU Pigment Paste
What information should I send to get a suitable paste recommendation?
Send your polyol type, isocyanate type, process, target shade or color sample, and any dosage or viscosity limits. The more specific the system data, the less trial-and-error is needed.
Can one paste work in different polyurethane systems?
Sometimes, but do not assume it. Carrier and pigment chemistry decide this, and each system should be confirmed by a short trial.
Is solvent-free always better?
No. It suits cast and flooring parts where volatiles cause defects, but thin sprayed coatings may need a solvent-containing paste for flow and leveling.
Why do bubbles appear after adding pigment paste?
The most common cause is moisture in the paste or carrier reacting with isocyanate. Check water content first, then storage conditions and mixing method.
Is there a minimum order quantity?
Our listed terms state no MOQ. Confirm quantity, packaging and the 30-day timeframe in your quotation.
Send Your System Details for a Quote
If you are looking for a PU color paste supplier, contact Sholee Chemicals with your polyol type, process and target shade. We will respond with the latest quotation and selection advice.